Broken Sprinkler?
Landon Can Fix It.
Owner-operated sprinkler repair across North Richland Hills, Hurst, Watauga, Haltom City, Keller, and Southlake. Licensed Texas irrigator. $0 service call fee. $75 per hour labor only. No dispatch, no upsell, no surprise invoices.
Sprinkler repair in Hurst from Spray Irrigation Co. costs $75 per hour for labor plus parts (quoted before installation), with a $0 service call fee. Most common repairs — broken heads, failed valves, controller issues — take 30–90 minutes and total $100–$250.
Real jobs.
Real totals.
The most recent Hurst job: a head that kept leaking because the valve feeding it was failing. A new Hunter valve fixed it, and the total was $81.02.
All recent jobs, with prices →
What's Wrong With
Your Sprinklers?
Click the symptom that best matches what you're seeing. Landon will show you the most likely causes, what a fix typically costs, and how long it usually takes.
Select a symptom above to see likely causes and cost estimates
⚠ Diagnostic guide only · Every system is different · Final diagnosis requires an on-site visit (which is free — $0 service call)
Four Steps. No Mystery.
From the first phone call to the moment Landon's truck pulls out of your driveway, here's exactly what happens — and what you pay for each step.
Call or Text Landon
(817) 993-9306 rings Landon's personal phone. Describe the problem or text a photo — he'll usually tell you what's likely wrong on the spot.
Schedule the Visit
Most non-emergency repairs are scheduled within 1–3 business days. Emergencies get same-day or next-day priority when possible.
Diagnose on Site
Landon arrives, diagnoses the problem, and quotes you a specific price in writing — parts, labor, total. You approve before anything is touched.
Fix It & Test It
The repair happens, the zone is tested, the area is cleaned up. You pay only for the time worked at $75/hr plus approved parts — nothing else.
Sprinkler repair from Spray Irrigation Co. costs $75 per hour for labor, plus parts quoted before installation, with a $0 service call fee. Most single-problem repairs take 30 to 90 minutes and total between $100 and $250. Complex diagnostics or underground pipe repairs can run higher, but every part and every hour is quoted before any work begins. Compare to the North Fort Worth industry standard of $75–$150 just for the trip before anything else.
Often, yes. The most common call I get in Hurst is a bill spike that traces to one or two zones leaking underground, usually at a PVC fitting that gave out after decades in the ground. The service call is $0, so it costs nothing to have me look.
Hurst Public Works will often credit part of a bill spike when an underground irrigation leak is documented and repaired. The decision is the city's, not mine. I give you photos and paperwork to file with them.
Most of what I work on in Hurst was installed between 1970 and 1995, and it is almost always cheaper to repair than to replace. If yours is past that point I will tell you before you spend anything.
Hurst borders North Richland Hills, where I'm based, so I'm about ten minutes away. I'm in Bellaire, Hurst Hills, Redbud Heights, Heritage Park and Winewood every week.
Call Landon. No Runaround.
(817) 993-9306 is Landon's personal number. He answers himself. $0 to come out, $75/hr for labor, and an honest quote before anything is touched. That's the whole model.