Landon's job notes
Problemleaking head that was caused by a failing valve.
Solutionreplaced with a brand new Hunter valve and system inspected and adjusted.
Cost$81.02
As Landon wrote them after the job, spelling tidied.
Why the head wasn't the problem
A zone valve is supposed to shut tight when the controller turns the zone off. When the seal inside starts to fail, a little water keeps getting past it. That water has to go somewhere, and it usually seeps out of the lowest head on the zone, so that head gets the blame.
Replacing the head in that situation buys nothing, because the leak continues. On this job the head was the symptom and the valve was the cause.


What was done
The valve was dug out and replaced with a new Hunter valve, and the system was inspected and adjusted. The second photo is the finished box, set back level with the turf.
Why would a leaking sprinkler head need a new valve?
If water seeps from a head after the zone has shut off, the valve upstream is often not closing fully. Water slips past it and drains out of the lowest head. Fixing the valve stops the leak. Changing the head usually does not.
Related
Sprinkler repair in Hurst: prices and how Landon works What a quiet valve leak does to a water bill All recent jobs, with pricesJob notes and photos are Landon's, from this visit. The write-up around them is by Clarion Studio, the company that builds this website. The homeowner's name and address are left out on purpose, and the photos carry no location data. Photo times are the camera's own timestamps.